1.5/1B:Inlet 1.5 inch,Outlet 1 inch,B frame
XAH:Horizontal heavy duty slurry pump series
SiC Ceramic:Silicon carbide sintered wet end parts (impeller, volute liner, throat bush)
Pump type:Single‑stage, single‑suction, cantilever horizontal centrifugal slurry pump
Casing:Ductile iron double shell (outer casing)
Wet parts:Reaction‑bonded / sintered SiC ceramic
SiC advantage:Abrasion resistance ~4× higher than A05 high chrome iron; excellent corrosion resistance pH 0–12; service life 3–8× longer than metallic wet ends; low friction, energy saving
Fully interchangeable with Warman 1.5/1B‑AH spare parts
Compact footprint, ideal for small circuit, lab, pilot plant
SiC wet parts resist fine sharp particles: silica sand, tailings, fluorite, abrasive chemical slurry
Large‑diameter short shaft, heavy bearing assembly, low vibration
Easy liner & impeller replacement, simple maintenance
Fine mineral processing circuit, small beneficiation plant
Silica sand, quartz, feldspar slurry
Acidic / alkaline corrosive tailings
FGD small circulation, chemical abrasive slurry
Pilot test, mining lab, dredging & sand washing
Ceramic, glass raw material slurry transfer
1.5-1B-XAH (B)
———1.5: Inlet Size (inch)
———1: Outlet Size (inch )
———B: Frame Type
———SIC: SIC Ceremic Heavy Duty Slurry Pump


Shaft Seal Types
XAH series heavy-duty slurry pumps support three mainstream shaft sealing solutions: packing seal, expeller seal and mechanical seal. Users can select the most suitable sealing configuration based on on-site working conditions and personalized application requirements. The detailed structure and applicable specifications of each sealing type are displayed in the figure below.

Packing Seal
A packing seal works by filling elastic packing material into the pump’s stuffing box. As the packing gland compresses the material, it expands radially to fully seal the clearance between the shaft sleeve and stuffing box, achieving effective leakage prevention. This sealing structure allows a slight amount of dripping during operation and features excellent universal adaptability. Serving as the standard sealing configuration for Warman slurry pumps, it boasts mature technology, affordable costs and extremely convenient replacement and maintenance procedures. It is worth noting that packing seals require continuous shaft sealing water for normal operation, with the sealing water pressure maintained 0.035MPa higher than the pump outlet pressure.

Expeller Seal
The expeller sealing structure prevents slurry leakage by utilizing the centrifugal pressure generated by the impeller-driven expeller during operation. This sealing method requires no shaft sealing water, avoiding dilution of the conveyed slurry, which makes it ideal for water-scarce working environments and applications that demand undiluted slurry media. This seal is only applicable when the pump inlet pressure is no more than 10% of the outlet pressure; it cannot work properly beyond this range. Fitted with an oil cup, the expeller ring needs regular grease replenishment to ensure stable performance. Notably, the packing structure undertakes the sealing function when the pump is shut down. In addition to standard metal configurations, rubber-made expeller rings and complete expeller assemblies are also available for diverse working conditions.

Mechanical Seal
Mechanical seals are specially designed for strict no-leakage working scenarios and fluid conveying requirements. Though they feature a relatively higher cost, they deliver outstanding durability and simple replacement procedures, while requiring standardized and rigorous daily operational maintenance. Three mainstream types are available for different working conditions. The external flushing mechanical seal requires clean external flushing water with a constant pressure of 0.1MPa. The internal flushing mechanical seal also adopts clean flushing water, with the water pressure set 0.1MPa higher than the pump chamber pressure to achieve effective internal flushing. The non-flushing mechanical seal operates stably without any flushing water supply, meeting the demands of diverse special working conditions.
XAH series heavy-duty slurry pumps are equipped with robust cartridge-style bearing units that adopt grease lubrication for stable and long-term operation. Frames ranging from A, B, C, D, E, F to G are fitted with two opposed-mounted imperial single-row tapered roller bearings for balanced load bearing. In comparison, frame types including R, S, ST, T, TU and U feature a different configuration: one imperial double-row tapered roller bearing installed at the pump side, paired with two metric cylindrical roller bearings arranged at the drive side. The end cover adopts a labyrinth sealing structure with an integrated dust ring to block external dust and impurities. Precise axial clearance adjustment can be easily completed via the adjusting bolt installed between the pump frame and bearing .

Pump Frame
XAH heavy-duty slurry pumps feature an integral pump base designed to securely support the cartridge bearing and shaft set via clamping fasteners. Few penetrating bolts fasten the frame plate onto the main frame body. This compact, high-rigidity layout simplifies field disassembly and routine servicing. Every frame specification matches a rated maximum drive power plus the optimal flush water flow rate required for packing-type shaft seals.

| Frame Type | Max Power (kW) | Packing Seal Water (l/s) |
| A | 7.5 | 0.15 |
| B | 15 | 0.25 |
| C | 30 | 0.35 |
| CC | 55 | 0.55 |
| D | 60 | 0.55 |
| E | 120 | 0.7 |
| F | 260 | 0.7 |
| G | 600 | 1.2 |
| R | 300 | 0.7 |
| ST | 560 | 1.2 |
| TU | 1200 | 1.6 |
XAH series heavy-duty slurry pumps rely on matched drive motors to supply power for slurry conveying tasks, with multiple flexible transmission options for different installation layouts. Common drive forms consist of direct-coupled DCZ, horizontally side-mounted CRZ, top vertical CV and inverted top-mounted ZVZ to satisfy varied site layout demands.




